Loading ...
$40.00
100 in stock
The 16FH suppressor socket variant for the Dead Air Wolfman, which has spanners for the DA444 3-lug mount, the outer body’s frontal recesses and now, the new Flash Hider Front Cap. These features allow a tucked can to be pressed and rotated from the front while either in long or short configurations, the 3-lug mount to be removed/installed and the latest RXD683 front cap can be torqued on and off. When used in conjunction with our Torclamp vise clamp, it can be used to separate the front body section from the rear one and then re-assemble them.
The 5/64″ diameter spanner pins that are on the 16F Socket for the legacy front cap slots have been replaced with a hexagonal spanner that perfectly fits the new flash hider front cap feature. This eliminates the potential for dowel pin breakage.
Get your RXD683 Wolfman flash hider front caps HERE.
Not the socket system tool you’re looking for? See the entire set HERE.
Want to see all of our products in proper order? The link is below!
Since we believe in continuous improvement and taking things to the next level, we have developed a socket set that incorporates all of the features of our full-size wrenches but with important differences. A lot of time and thought went into these:
1. The sockets are smaller than the discontinued full-size wrenches and use a ½” square drive handle, which is available at hardware stores, plus we have our own compact and lightweight handle.
2. Sockets can also be used without a handle, but the option is there for applying serious torque.
3. MADE IN THE USA using carbon fiber reinforced nylon, which is considerably stronger than typical 3D printed materials.
4. These polymer tools won’t damage mounts or front caps.
5. Stainless steel dowel pins are used on sockets that require them for certain spanner features.
6. Each one of the sockets has dedicated holes for parachute cord lanyards (AKA dummy cords).
7. The sockets can be conveniently stored on storage strips that are available at hardware stores. Detents are on all four sides of the ½” squares.
8. The numbering system with suppressor make/model key eliminates the need to update tool identification markings as suppressor names evolve or as compatibility expands (Kraken/Mod9, Octane/Octane 2.0, Omega 9K/45K, Sandman/Nomad, etc.). Only our list needs to be updated, which will be on our website (suppressortools.com).
9. The web address is on the bottom of each socket and on the top of the handle, minimizing the brand footprint. Some potential customers complained that the company name and city were on the full-size wrenches, so the identification markings were minimized. A customer can have additional text laser engraved if desired.
10. Sockets are capable of withstanding serious torque, which makes them perfect for use with Energetic Armament Vox Blox soft vise jaws, which are available at suppressortools.com.
11. If you break one, we will replace it – but that’s not likely to happen.
12. Suppressors should be allowed to cool below 200̊ F before using the sockets.
Reviews
There are no reviews yet.